On-Screen Menu (continued)
IMD CONFIGURATION SUBMENU (continued)
■Tally Source
The
Standard
Use the Standard setting to control tally via contact closure on the
Image Video HW
Use the Image Video HW setting to control Image Video tally states via contact closure on the
Image Video 422
Use the Image Video 422 setting to control Image Video tally states via the Image Video serial protocol. LED and OSD tally will be disabled in this mode, as Image Video tally states are manifested in the text color and other parameters. This mode requires the IMD Tally Mode parameter to be set. Consult Image Video documentation for further information.
Standard + IV422
Use the Image Video 422 setting to control Image Video tally states via the Image Video serial protocol, while controlling LED and OSD tally using contact closure on the
TSL/Marshall 422
Use the TSL/Marshall 422 setting to control OSD and LED tally via the TSL or Marshall serial protocols.
■IMD Tally Mode
Use this setting when using Image Video tally control. Choose one of the following settings, in conjunction with the Image Video controlling device. T1, T2, T1T2, T2T1,
SERVICE SUBMENU
■Overview
The Service submenu displays the status of the serial interface, for troubleshooting or debugging purposes only. Contact Marshall Electronics for further information. The following information is displayed:
• Serial Characters | Rx: | Total number of characters received by the UART |
| Tx: | Total number of characters transmitted by the UART |
• Serial Errors | P: | Number of parity errors |
| F: | Number of framing errors |
| O: | Number of FIFO overrun errors |
• Packets | Rec: | Number of packets received |
| Exe: | Packets Executed |
• Packet Errors | CRC: | Number of packets that failed CRC check |
| Err: | Number of other packet errors |
• Last Command | R: | Last command received |
| E: | Last command executed |
• Software State | State: | 000:000 1010111 (correct value) |
21
