Martin Audio C8.1T manual C4.8T & C6.8T rail orientation, C-bracketclipped over rail, Step

Suitable hole cutting methods will depend on the ceiling structure, local conditions, personnel, equipment etc and must be determined by the installer.

Step 2

Place a tile rail either side of the ceiling hole and clip the C-bracket over the upright edges of the tile rails.

Note the rail orientations – outwards for the C4.8T and C6.8T, inwards for the C8.1T.

C4.8T & C6.8T rail orientation	C-bracket clipped over rail
(rails placed outwards)

C8.1T rail orientation	C-bracket clipped over rail
(rails placed inwards)

All material © 2007. Martin Audio Ltd. Subject to change without notice.