MartinLogan 6 user manual Specifications

Specifications*	MARTINLOGAN MOTION 6
Frequency Response	120–25,000 Hz ± 3 dB
Dispersion	80° x 80°
Sensitivity	89 dB @ 2.83 volts/ meter
Impedance	4 Ohms. Compatible with 4, 6
	or 8 Ohm rated amplifiers.
Crossover Frequency	3,300 Hz
High Frequency Driver	1” x 1.4” (2.6cm x 3.6cm)
	Folded Motion Transducer with
	5.25” x 1.75” (13.3cm x
	4.4cm) diaphragm.
Low Frequency Drivers	Two 3.5” (8.9cm) poly cone
	with stamped steel basket. Non-
	resonant asymmetrical chamber
	format. Rigid structured dust cap
	to reduce cone break-up modes.
Cabinet	Sealed
Components	Custom air core coil and low
	DCR steel laminate inductors.
	Polyester film capacitors in series
	and low DF electrolytic capaci-
	tors in parallel. Overall system
	thermal/current protection.
Recommended Amp Power . . .	20–130 watts
Binding Post Inputs	Push style with banana jacks
Weight	6 lbs. (2.72 kg)
Dimensions (HxWxD)	5.25” x 17.5” x 3.75”
	(13.3cm x 44.5cm x 9.5cm)

*Specifications are subject to change without notice.

MARTINLOGAN MOTION 8

70–25,000 Hz ± 3 dB

80° x 80°

89 dB @ 2.83 volts/ meter

4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers.

3,000 Hz

1” x 1.4” (2.6cm x 3.6cm) Folded Motion Transducer with 5.25” x 1.75” (13.3cm x 4.4cm) diaphragm.

Two 4” (10.2cm) paper cone with stamped steel basket. Non- resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes.

Sealed

Custom air core coil and low DCR steel laminate inductors. Polyester film capacitors in series and low DF electrolytic capaci- tors in parallel. Overall system thermal/current protection.

20–180 watts

Push style with banana jacks

8.5 lbs. (3.85 kg)

5.6” x 22.25” x 5.25” (14.2cm x 56.5cm x 13.3cm)

9