Door Features
There are many different door features available for your new unit. Full panel overlay doors and full wrap painted and stainless doors are available. These doors are fully reversible.
To Reverse the Door Swing of the
Full Panel Overlay and Full Wrap Doors
The door you relieved is for a right hand swing unit. If the unit is to be changed to a left hand swing door, pre- drilled striker plate holes are in place on the backside of the door on both ends. No additional drilling is neces- sary to mount the striker plate when you reverse the door swing. Just unscrew the striker plate from the loca- tion it is mounted to for right hand swing and then mount the striker plate at the end opposite of its previ- ous location with the existing screws.
If your door has an inner door liner with formed in shelves, it will need to be turned around for use in the left hand swing. Using a small, flat blade screwdriver, pop the plastic screw covers up to access the phillips screws that secure the formed door liner to the door. Using a phillips screwdriver, remove the phillips screws that secure the formed door liner to the door. Rotate the formed door liner 180 degrees, line up the mounting holes in the door liner with the mounting holes on the door. Use the existing fasteners and plastic screw caps to secure the formed door liner to the door. Your door swing conversion is complete.
Door Handle
The full wrap painted and stainless doors come with a standard, vertically oriented
The full panel overlay doors are designed to receive a custom supplied panel. The customer will need to sup- ply the door handle that will be mounted to the customer supplied panel.
4
