Window Installation
Structural Installations
These instructions are applicable for the following Structural installations:
Clad Ultimate Double Hung Magnum | Wood Ultimate Double Hung Magnum |
These instructions are applicable for the following StormPlus products:
Clad Casemaster1 | Wood Casemaster1 |
Clad Ultimate Double Hung (CUDH)2 | Wood Ultimate Double Hung (WUDH)2 |
Clad Direct Glaze Polygon/Round Top | Wood Direct Glaze Polygon/Round Top |
ABSTRACT
These instructions advise the window installer/carpenter/contractor on the recommended way to install Marvin windows where structural installation is necessary, including those rated for use in Impact Zones 2 and 3. Exact installation methods for Impact Zone 4 windows are NOT included. Instead, refer to the Notice of Acceptance (see details inside).
In addition to steps for installing your window, included within are: Rough opening (RO) preparation for recessed masonry applications; RO prep and sealing details for standard wood frame construction; detailed fastening methods and more.
The procedures within these instructions are consistent with those used in testing to achieve the advertised DP rating. Contact your local Marvin dealer if your construction scenario differs from those detailed within.
Regional standard practices, environmental conditions and codes may vary and supersede the procedures contained within. The responsibility for compliance is yours: the installer, inspector, and owner(s). See the Technical Installation Specifications inside for more details.
1Includes Awning, Operator, Picture 1″, Stationary 3/4″, Round Top Operator, and Round Top Stationary. 2Includes Picture, Transom, Round Tops and Polygon
19970019
