MASS Engineered Design RU-200 6FLOW COOLERS, 2345, Flexible, Bridge Cover, Clamp Screw, Support

	D I P A N D F L O W C O O L E R S U S E R ’ S M A N U A L
	Flexible
	Bridge Cover
Clamp Screw	Support
	Coil

6FLOW COOLERS

Connect the Flow Cooler to a system using 16 mm bore hose which is capable of withstanding both the temperature of operation and the liquid being used. 12 mm bore hose may be used if the hose is soft such as silicone rubber. Ensure the flow is in through the INLET pipe and out through the OUTLET as cooling power will be lost if the flow is reversed.

OUTLET

INLET

If the system is of a small bore or the viscosity of the liquid prevents the flow being maintained, a by-pass should be incorporated in the system.

Flow Cooler	C-85 Circulator			By-pass	External circuit
	2	2345	(If necessary)		P A G E 13