Master Appliance PH-1100 Important Safety Instructions cont’d, Master Appliance Corp

Important Safety Instructions (cont’d)

14)Remove all highly flamma- ble materials and other debris from the work area.

15)Wear safety glasses at all times.

16)When using an extension cord, use only a 3-wire grounded cord with a mini- mum of 14 gauge capacity. We recommend they be listed by Underwriters Laboratories (UL) in the U.S.A. or (CSA) Canadian Standards Association in Canada and be suitable for outdoor use. Cords marked for outdoor use are also suitable for indoor use.

17)Don’t abuse cordset. Never yank by cord to remove from electrical out- let or carry tool by cord.

18)Don't remove adjustable stand. When not hand held, place tool on a level surface. Position cordset so it does not cause tipping.

19)Keep a fully-charged fire extinguisher close at hand.

20)Do not leave heat gun unattended while running or cooling down.

21)Stay alert. Do not operate tool when you are tired. Use common sense and watch what you are doing.

22)Store properly. Do not store while hot. Store in a dry, high or locked-up location. Keep out of the reach of children.

23)Always unplug tool before performing any mainte- nance. When servicing, use only Master Appliance brand replacement parts. We recommend that all maintenance be performed by a qualified repair techni- cian who is experienced in the repair of electric tools, a qualified service organi- zation, or our repair staff.

24)WARNING: This product, when used for soldering and similar applications, pro- duces chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

Send product to:

Master Appliance Corp.

Attn: Repair Department

2420 - 18th Street

Racine, Wl 53403

Operating Instructions

Your Master Heat Gun is a heavy-duty, industrial-quality, general-purpose heat gun. You can do more heating jobs faster with this heat gun because of its high power and air flow ratings.

This product provides a fast flow of heated air for applica- tions such as activating adhe- sives, bending and forming plastics, curing epoxies, deburring plastics, defrosting frozen coils, drying negatives and parts, heating solids and liquids, loosening nuts and bolts, removing floor tiles and putty, repairing vinyl, shrinking tubing and packaging, soften- ing materials and stripping paint. It's your dependable

answer, “Wherever a fast, portable heat is the need.”

The proper amount of heat for each application is dependent upon the adjustment of the air intake shutter, the distance of the nozzle opening from the work surface and length of time that heat is applied to the work surface.

Before performing an applica- tion, we recommend that you experiment with a piece of scrap material. Use care in approaching the work until you find the proper combina- tion of shutter adjustment, dis- tance from the work surface and heat application time.

Use a gentle back and forth motion when applying heat unless it is found that a con- centrated heat is desired.

To Operate Heat Gun

1)Plug heat gun into properly rated outlet.

2)Move rocker switch to “Hot” position. Heat gun will come up to full operating temperature in approxi- mately two minutes.

3)Adjust air intake shutter to desired position. Open will provide slightly cooler air. Closed will provide the highest temperature.

4