Important Safety Instructions cont’d | Master Appliance PH-2100

Important Safety Instructions (cont’d)

the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work clothes. Wash hair and body thoroughly with soap and water.

12.WARNING: To reduce the risk of fire or electric shock, do not expose heat guns to rain or mois- ture. Store indoors. Connect to grounded out- let only.

13.Do not use plug adapters or remove the ground prong from the plug. This tool is equipped with a 3- prong plug and a 3-wire grounding system. Connect to properly grounded outlets only.

14.Use heat gun only on adequately rated circuits to avoid overheating of electrical systems.

15.Proheat® Heat Guns can produce up to 1050°F of flameless heat out of the nozzle. Do not direct this hot air stream at your clothing, hands or body parts. Do not use as a hair dryer.

16.Do not touch nozzle opening or nozzle shield until cool. When in “Hot” mode, extreme heat is generated at those areas. Always hold tool by the handle or use perma- nently attached stand.

17.Run on cool before turning off. The nozzle and shield require approximately 3

minutes to become cool to the touch. Stand the unit on its end with the nozzle pointing upward after turn- ing off.

18.Do not touch work surface with nozzle. Scrape paint with nozzle face at least 1” away.

19.Keep a clean work area. Messy or cluttered work areas invite accidents or injury.

20.Keep away from children. All visitors should be kept at a safe distance from the work area. Do not let visi- tors touch the tool or extension cord.

21.Use tool in a well-venti- lated area. Do not use near flammable liquids or in an explosive environ- ment (where fumes, gases or dust are present).

22.Remove all highly flamma- ble materials and other debris from the work area.

23.Wear safety glasses at all times.

24.When using an extension cord, use only a 3-wire grounded cord with a mini- mum of 14-gauge capac- ity. We recommend they be listed by Underwriters Laboratories (UL) in the U.S.A. or (CSA) Canadian Standards Association in Canada and be suitable for outdoor use. Cords marked for outdoor use are also suitable for indoor use.

25.Don’t abuse cordset. Never pull by cord to remove from electrical out- let or carry tool by cord.

26.When not hand-held, place tool on a level sur- face. Position cordset so it does not cause tipping.

27.Keep a fully-charged fire extinguisher close at hand.

28.Do not leave heat gun unattended while it is run- ning or cooling down.

29.Stay alert. Do not operate tool when you are tired. Use common sense and watch what you are doing.

30.Store properly. Do not store while hot. Store in a dry, high or locked-up location. Keep out of the reach of children.

31.Always unplug tool before performing any mainte- nance. When servicing, use only Master Appliance brand replacement parts. We recommend that all maintenance be per- formed by a qualified repair technician who is experienced in the repair of electric tools, a qualified service organization, or our repair staff.

For factory repair service, send product to:

Master Appliance Corp.

Attn: Repair Department

2420 - 18th Street

Racine, Wl 53403

Save These Instructions.

PH-2100, PH-1100K specifications

The Master Appliance PH-1100K and PH-2100 are industry-leading heat guns designed for professionals and DIY enthusiasts who demand reliability, performance, and versatility in their tools. Both models are engineered for a wide range of applications, including shrink wrapping, paint stripping, and surface drying, making them essential additions to any toolkit.

The PH-1100K features a compact and lightweight design, making it easy to handle during prolonged use. It boasts a powerful 1100-watt motor that delivers rapid heating and a maximum temperature of 1,100 degrees Fahrenheit. This model includes two heat settings, allowing users to adjust the temperature according to specific tasks. The integrated overload protection ensures safety, automatically shutting off the tool in case of overheating, thereby extending its lifespan.

For users seeking enhanced performance, the PH-2100 takes it a step further with an increased wattage of 2100 watts. This model heats up quickly and reaches a maximum temperature of 1,200 degrees Fahrenheit. It also features an adjustable air velocity control, which permits users to switch between high and low airflow settings, providing better control over the application. The ergonomic design of both models ensures comfort during extended use, with an easy-to-grip handle that minimizes fatigue.

One notable characteristic of the Master Appliance heat guns is their versatility in accessories. Both the PH-1100K and the PH-2100 come with a variety of nozzles that cater to specific tasks. For instance, the flat nozzle is perfect for wide surfaces such as drying paint, while the round nozzle focuses heat on a specific point, ideal for shrink tubing or removing adhesive.

These heat guns are built with durability in mind, featuring a rugged exterior that can withstand tough working conditions. They are also designed with cooling vents that prevent the motor from becoming too hot, ensuring consistent performance over long periods.

Overall, the Master Appliance PH-1100K and PH-2100 are exceptional heat guns that deliver power, safety, and versatility for any heating need. Whether you are a professional tradesperson or a home DIYer, these models provide the efficiency and reliability required to tackle a wide range of tasks with ease and confidence.

Master Appliance PH-2100 Important Safety Instructions cont’d, Wear safety glasses at all times

Models: PH-2100 PH-1100K