Spark Plug
1.Remove upper shell (see page 10).
2.Remove fan (see page 15).
3.Remove spark plug wire from spark plug.
4.Remove spark plug from burner head using 13/16"
5.Clean and regap spark plug electrodes as follows:
2.8 mm (0.110") gap
6.Install spark plug in burner head.
7.Attach spark plug wire to spark plug.
8.Replace fan (see page 15).
9.Replace fan guard and upper shell.
Spark Plug
BurnerWire
Head
Spark
Plug
Figure 8 - Spark Plug Removal
Bend Here to Adjust Gap
Gap
Figure 9 - Spark Plug Gap
11
102384