Maintenance and Repairs, Stopping Engine

OWNER’S MANUAL

OPERATION

Continued

1.Check items to be powered. Their nameplate lists their wattage ratings.

Note: The wattage ratings for some electrical motors are misleading. They may require up to three-times their rated wattage to start. You must figure total electrical load wattage. Make sure total wattage of all electrical loads does not exceed rated wattage of generator. See Determining Electrical Load For Generator, page 9.

2.Start engine. Let engine reach full speed.

3.Connect electrical loads one at a time. If the load consists of electric motors, start them first. Always start the larg- est first. Start each motor individually.

DISCONNECTING ELECTRIC LOADS

Remove electrical loads one at a time. Re- move voltage sensitive items first. Voltage sensitive items include TVs, VCRs, and other home electronic items.

STOPPING ENGINE

IMPORTANT: The engine speed is preset. The throttle is locked in preset position. Do not adjust throttle.

Follow the steps below to stop engine.

1.Remove all electrical loads from gen- erator (see Disconnecting Electrical Loads). Remove electrical loads one at a time.

2.Let engine run for two or three min- utes after removing electrical loads. This lets engine cool slightly.

3.Move engine lever or turn engine switch to the OFF position (see Figure 24).

4.Turn fuel valve lever off except model MGH3000PR. Do this by moving valve lever fully to the left (see Figure 25).

Model

MGH3000PR

		ENGINE SW
	Models HWI3000,	ON
	Models HWI3000,	OFF
	MGH3000, MGH4000C,	OFF
	MGH3000, MGH4000C,
	MGH4000CI, MGH5000C,
	MGH5000CI, MGH6000C,
	and MGH6000CI

HONDA

Models MGH5000CIE,	ON
OFF	START
MGH7000C, MGH7000CI,

and MGH10000

ENGINE SW

CIRCUIT

BREAKER

Figure 24 - Engine Switch In OFF Position

Fuel Valve Lever

(Off Position)

Figure 25 - Fuel Valve Lever Off (Model MGH7000C Shown)

MAINTENANCE AND REPAIRS

WARNING: Only a qualified electrical service person should service and repair the alternator on this generator. Use only fac- tory approved replacement parts.

CAUTION: The engine speed is preset. The throttle is locked in preset position. Do not adjust throttle. Preset position lets en- gine run at 3600 RPM under load. The engine must maintain 3600 RPM for generator to create cor- rect voltage. Running engine at lower speeds will damage gen- erator and powered items.

CAUTION: Shut off generator before performing maintenance.

IMPORTANT: Keep generator level when servicing. Never turn generator upside down or stand it on end to service.

Note: We supply the engine owner’s manual with generator. Refer to that manual for questions concerning engine maintenance and repairs.

Non-engine parts require little maintenance. Keep generator clean. Use a damp cloth to clean outside surfaces. Never use water to clean generator. Water can cause damage to internal parts. Use vacuum to clean air inlet and outlet louvers of alternator.

105420

MGH3000PR, MGH4000C specifications

The Master Lock MGH4000C and MGH3000PR are two innovative locks, designed with cutting-edge technology to enhance security and provide convenience for users. Both models embody Master Lock's commitment to safety and reliability, making them popular choices for both personal and professional use.

The MGH4000C is a high-performance combination lock that features a sleek, modern design. One of its standout features is the Bluetooth connectivity, allowing users to lock and unlock their devices from a distance using their smartphones. This smart technology provides unprecedented convenience, eliminating the need for physical keys or remembering complex combinations. The lock can easily be managed through the Master Lock app, enabling users to grant access to others and track usage history with just a few taps on their smartphone.

In addition to Bluetooth functionality, the MGH4000C is built with a robust steel body and shackle, ensuring durability in various weather conditions. Its weather-resistant properties make it ideal for outdoor use, providing reliable security against theft. The lock is powered by a long-lasting battery, which can be easily replaced, ensuring that it remains operational even for extended periods.

The MGH3000PR, on the other hand, is a versatile dial combination lock known for its traditional appeal combined with advanced security features. This model utilizes a patented anti-shim technology that adds an extra layer of resistance against tampering and unauthorized access. The MGH3000PR is designed with a heavy-duty construct, making it suitable for lockers, storage units, and other applications requiring strong security standards.

One of the key features of the MGH3000PR is its easy-to-read combination dial, which allows users to quickly input their codes without hassle. The lock also comes with a resettable design, meaning users can set their own combinations for personalized security. This feature is crucial in ensuring that users have full control over who can access their belongings.

Both models reflect Master Lock's dedication to innovation, safety, and user-friendly functionality. With their unique features and robust designs, the MGH4000C and MGH3000PR cater to a wide range of security needs, whether for indoor or outdoor use, making them excellent investments for anyone seeking reliable protection for their valuables.

Master Lock MGH4000C Maintenance and Repairs, Disconnecting Electric Loads, Stopping Engine

Models: MGH3000PR MGH4000C