Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power supply cord to the system. Press On/Off switch at the rear of the TV. Then the TV switches itself to
2- To switch on the TV from
Press a digit button on the remote control so that a programme number is selected,
or,
Press “
”, "
By either ways the TV will switch on and the LED will turn off.
To switch the TV off:
Initial Settings
Initial APS (Automatic Programming System)
The following menu will be displayed on the screen when you turn your TV on for the first time. APS, searches and sorts all channels and stores them automatically on your TV, according to the trans- mission of programme systems in your area.
| AUTO PROGRAM |
Language | English |
Country | UK |
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
•Press the
or,
Press the “
” button located on the right side of the TV, so the TV will switch off and the LED will become BLUE.
To power down the TV completely, press On/Off switch,
or
unplug the power cord from the mains socket.
OK |
| Cancel |
First of all choose Language and Country by us- ing “ ” or “” and “” or “ ” buttons. This will affect the sort process in APS. To start APS, press the RED or “OK” button.
|
| APS is running... | |
| UK - I | 155,25 Mhz | |
|
|
|
|
| 01 - |
|
|
|
| Cancel | |
|
|
|
|
After APS is finalized, the programme table will ap- pear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes.
If you do not accept the locations and / or the programme names of programmes, you can change them from the Program Menu.
- 7 -
