digit buttons on the remote control. There are 100 program storage between 0 and 99.
Band
Band can be selected either “C” or “S” by press- ing “” or “ ” button.
Channel
Channel can be changed by “” or “ ” button or Digit Buttons.
Colour System
By pressing “ ” or “ ” button, select Colour
System. Press “” or “ ” button to change the colour system to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not avail- able for the Colour System.
Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well.
Sound System
By pressing “” or “” button, select Sound System. Press “ ” or “” button to change the sound system to BG, DK, I, L or LP.
Fine Tune
By pressing “” or “” button, select Fine Tune. Press “” or “ ” button to adjust the tuning.
Search
By pressing “” or “” button, select Search. Press “” or “” button to start program search- ing. The searching will stop when a signal is found. You can also enter a frequency value directly by pressing the digit buttons.
VCR (Video Cassette Recorder)
•If you want to watch a VCR source then it will be better to set VCR mode “on”. For this, while the cursor is on this item press the “ ” or “ ” buttons to set it “On”.
•If you want to watch a DVD, then you must set this item “Off”.
Store Program
By pressing “” or “ ” button, select Store
Program. Press “” or “” or “OK” button to store the adjustments. “Program Stored” will be displayed on the screen.
Program menu
By pressing “ ” or “ ” button, select the fifth icon. Program menu appears on the screen.
PROGRAM
01 | ITV | 11 | C - 43 |
02 | ZDF | 12 | C - 64 |
03 | CH5 | 13 | C - 68 |
04 | C - 02 | 14 | S - 40 |
05 | C - 05 | 15 | - - - - - |
06 | C - 06 | 16 | - - - - - |
07 | C - 08 | 17 | - - - - - |
08 | C - 21 | 18 | - - - - - |
09 | C - 23 | 19 | - - - - - |
10 | C - 35 | 20 | - - - - - |
|
| Name | Insert |
|
| Delete | APS |
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navi- gation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically.
Name:
To change the name of a decided programme, se- lect the programme and press the RED button.
The first letter of the selected name starts to blink. Press “ ” or “ ” button to change that letter and
“” or “” button to select the other letters. By press- ing the RED button, you can store the name.
Insert:
Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navi- gation buttons move the selected programme to the decided programme space and press the GREEN but- ton again.
Delete:
To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the se- lected programme from the programme list, and the programmes below shift one up.
APS (Automatic Programming System)
When you press the BLUE button for APS, the follow- ing warning screen will be displayed.
- 12 -
