Preparation
For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situa- tions, please do not place any objects on top of the set.
Use this apparatus in moderate climates.
Features
Before Switching On Your TV
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
•After unpacking, allow the TV set to reach room tem- perature before you connect the set to the mains.
Connections To The Aerial Input Socket
• Remote controlled colour television. |
• 100 programmes from VHF, UHF bands or cable |
channels can be preset. |
75
VHF/UHF
CABLE TV
• It can tune cable channels. |
• Controlling the TV is very easy by its menu driven |
system. |
• It has 2 SCART sockets for external devices (such |
as video, video games, audio set, etc.) |
• Stereo sound system (German+Nicam). |
• Full function Teletext . |
Fastext (1000 Pages), TOP text. |
• Headphone connection. |
• Direct channel access. |
• A.P.S. (Automatic Programming System). |
• All programmes can be named. |
• Forward or backward automatic tuning. |
• Sleep timer. |
• Child Lock. |
• Automatic sound mute when no transmission. |
• NTSC Playback. |
• AV in and |
• It has an HDMI connector for Digital Video and |
Audio. This connection is also designed to accept |
High Definition signals. |
• AVL (Automatic Volume Limiting) |
• When no valid signal is detected, after 5 minutes the |
TV switches itself automatically to |
• PLL (Frequency Search) |
• Stereo PC Audio Input |
• 3D Comb Filter |
• Audio Line Out |
REAR OF THE TV
NOTE : Connect the aerial or cable TV plug to the Aerial input socket located at the rear of the TV and connect the cable plug coming out from the TV out socket located on the devices (VCR,
How To Connect Other Devices
IMPORTANT: Switch off the TV before connecting any external device.
Sockets for external connections are at the rear side of the TV. For connection of other devices via SCART refer to the manuals of the related devices.
Inserting Batteries In The Remote Control Handset
•Remove the battery cover located on the back of the handset by gently pulling downwards from the indicated part.
•Insert two AAA/R03 or equivalent type batteries inside. Place the batteries in the right direction.
•Replace the battery cover.
NOTE: Remove the batteries from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of batteries.
- 4 -
