HP J4660, J4680 Change device settings, Warning messages, Error messages, Critical error messages

Models: J4550

1 196
Download 196 pages 24 Kb
Page 21
Image 21
Warning messages

Warning messages

Warning messages inform you of events that require your attention, but they do not prevent the device from operating. An example of a warning message is Low On Ink.

Error messages

Error messages communicate that some action must be performed, such as adding media or clearing a media jam. These messages are usually accompanied by a blinking red Attention light. Take the appropriate action to continue printing.

If the error message shows an error code, press the Power button to turn off the device, and then turn it on again. In most situations, this action solves the problem. If the message persists, your device might need service.

Critical error messages

Critical error messages inform you of a device failure. Some of these messages can be cleared by pressing the Power button to turn off the device, and then turning it on again. If a critical error persists, service is required. For more information, see Support and warranty.

Change device settings

You can change the device settings from these places:

From the device control panel.

From the HP Solution Center (Windows) or HP Device Manager (Mac OS). For more information, see Use the HP photo and imaging software.

Error messages NOTE: When you are configuring settings in HP Solution Center or in the HP Device Manager, you cannot see the settings that have been configured from the device control panel.

To change settings from the device control panel

1.At the device control panel, press the left or right arrow keys to navigate to the function you are using (for example, Fax). Press OK to select that function.

2.To reach the option that you want to change, use one of the following methods:

Press a control-panel button, and then use the left or right arrow keys to adjust the value.

Select the option from the menu on the control-panel display.

3.Select the value that you want, and then press OK.

To change settings from the HP Solution Center (Windows)

See Use the HP photo and imaging software.

Change device settings

17

Page 21
Image 21
HP J4660, J4680, J4580, J4540, J4550 manual Change device settings, Warning messages, Error messages, Critical error messages