HP J4680, J4660, J4580 Prepare the device for shipment, Remove the ink cartridges before shipment

Models: J4550

1 196
Download 196 pages 24 Kb
Page 165
Image 165
Prepare the device for shipment

Prepare the device for shipment

If after contacting HP Customer Support or returning to the point of purchase, you are requested to send the device in for service, make sure you remove and keep the following items before returning your device:

The ink cartridges

The power cord, USB cable, and any other cable connected to the device

Any paper loaded in the main tray

Remove any originals you might have loaded in the device

This section contains the following topics:

Remove the ink cartridges before shipment

Remove the ink cartridges before shipment

Before you return the device, make sure you remove the ink cartridges.

•Remove the ink cartridges before shipment NOTE: This information does not apply to customers in Japan.

To remove ink cartridges before shipment

1.Turn on the device and wait until the print carriage is idle and silent. If the device will not turn on, skip this step and go to step 2.

Remove the ink cartridges before shipmentTo remove ink cartridges before shipmentManual background NOTE: If the device does not turn on, you can unplug the power cord and then manually slide the print carriage to the far right side to remove the ink cartridges.

2.Gently pull open the ink cartridge cover.

Prepare the device for shipment

161

Page 165
Image 165
HP J4680, J4660, J4580, J4540, J4550 manual Prepare the device for shipment, Remove the ink cartridges before shipment