HP J4550, J4680 Load an original on the scanner glass, To load an original on the scanner glass

Chapter 2

NOTE: To make a copy, the HP All-in-One must be connected to a computer, the computer must be turned on and you must be logged on, and the software must be installed and running. Also, the HP Digital Imaging Monitor in the Windows Taskbar must be installed and turned on at all times.

On a Macintosh computer, once the software is installed, it is always available when you turn on the computer.

Load an original on the scanner glass

You can copy, scan, or fax up to letter- or A4-size originals by loading them on the glass.

NOTE: Many of the special features will not work correctly if the glass and lid backing are not clean. For more information, see Clean the device.

NOTE: To make a copy, the HP All-in-One must be connected to a computer, the computer must be turned on and you must be logged on, and the software must be installed and running. Also, the HP Digital Imaging Monitor in the Windows Taskbar must be installed and turned on at all times.

On a Macintosh computer, once the software is installed, it is always available when you turn on the computer.

To load an original on the scanner glass

1.Lift the scanner lid.

2.Load your original print side down in the right front corner of the glass.

TIP: For more help on loading an original, refer to the engraved guides along the edge of the glass.

3.Close the lid.

20 Use the device