Maxi-Cosi DRU0632 Placing the child in the Maxi-Cosi Tobi, Taking the child out, Maintenance

EXI0203_GBA_Tobi_I_BW:-- 02-10-2008 15:21 Pagina 11

B. Placing the child in the Maxi-Cosi Tobi

• Place the child with his/her back straight in the Maxi-Cosi Tobi.

20• Slide the buckle sections together (part A on part B) and insert them into the belt buckle with a clearly audible “click” (20). When the buckle is closed, the belt system is blocked and can only be pulled tighter. If you need to make the belts longer, the buckle must first be opened again.

21	22	• Now pull the harness system tight by pulling on the adjustment belt (21,2). Pull until the indicator on the
		belt buckle turns green (21,2). If this is still silver the belt should be pulled tighter (22). Make sure that
		the indicator is green before driving. If it seems like the harness belt is still loose even though the	GB
		indicator is on green, the belt can be pulled more tightly. This will ensure optimum safety. While driving, it
		is possible that the indicator reverts back to silver as a result of the child’s movements. This is normal and
		will not affect the child’s safety.

•NOTE! The tighter the belts fit around a child, the better the protection.

•NOTE! Make sure the textured (anti-slip) side of the belt pads are positioned properly on your child’s shoulders/chest.

•NOTE! Make sure the belts are not twisted or folded double.

Always use the belt pads, as they are essential for your child’s safety.

Tell the child never to play with the belt buckle.

3.2Seat positions (Adjusting the seat into sitting and reclining positions) The Maxi-Cosi Tobi can be set in 5 positions.

23• Pull the positioning handle under the front of the seat upwards and then pull or push the seat forwards or backwards (23).

•Release the positioning handle in the desired position and push until you hear a “click”.

•NOTE! Check to make sure the Maxi-Cosi Tobi is securely locked in the desired position by pulling on it.

Checklist…

To ensure the optimal safety of the child, check before every trip to make sure that …

•the entire Maxi-Cosi Tobi is installed securely and firmly in the car,

•the height of the shoulder belts is suitable for your child,

•the belts are not twisted,

•the textured (anti-slip) side of the belt pads is positioned properly on your child’s shoulders/chest,

•the child is secure in the belts, the belt buckle is shut and the indicator is on green,

•the tether on the Maxi-Cosi Tobi is not damaged. If it is damaged, do not use the Maxi-Cosi Tobi in any circumstances and contact your retailer or importer immediately.

3.3 Taking the child out

• Place the Maxi-Cosi Tobi in the sitting position (also see section 3.2 Seat positions).

24• Open the belt buckle by pressing the red button of the buckle (24).

25• Loosen the shoulder belts by pulling them forwards as far as possible (25).

• Take the child out of the Maxi-Cosi Tobi.

4.MAINTENANCE

4.1General

•NOTE! Perform these actions only while the Maxi-Cosi Tobi is outside of the car.

•Use lukewarm water, soap and a cloth to clean the plastic parts of the seat. Do not use any aggressive cleaning agents.

•The fabric parts can be cleaned according to the instructions on the washing label; hand washing in luke- warm water and a mild detergent.

•NOTE! Never use lubricants – not even for the moving parts of the Maxi-Cosi Tobi.

Instructions for use

11