• When the seat belt has been installed properly, the various “views” will look as follows:
GB
Side view,
on the side of the
mechanism.
Opposite side belt buckle.
Rear view
Side view,
on the side where the belt buckle is located.
Checklist…
To ensure the optimum safety of the child, after installing the seat check once more that…
•the seat belt is tight and that it is not twisted,
•the hip part of the seat belt passes over the red belt marks and belt tensioner(s),
•the (diagonal) shoulder part of the seat belt is attached properly and passes through the two belt slots, along the red marks on the rear of the
•both belt clamps are closed,
•the belt tensioner(s) is in the tensioned, vertical position,
•the entire
B. Removing the Maxi-Cosi Tobi
11• Open the belt buckle of the seat belt (11).
12• Next, open both belt clamps (12).
13• Release the belt tensioner by pressing the button (13). The belt tensioner will now move down, into the horizontal position.
14• Remove the seat belt from the belt slots (14).
• Take the
3.PLACING YOUR CHILD IN THE MAXI-COSI TOBI
3.1Using the harness system
A. Adjusting the height of the harness
Before placing the child in the
15• Open the belt buckle (15) by pressing the red button of the belt buckle.
•The shoulder belts are now automatically released and can be made longer without pressing any other buttons.
16• Loosen the shoulder belts by pulling them forwards as far as possible (16).
•NOTE! Do not pull on the belt pads when doing so.
17• Place the child with his/her back straight in the
18• NOTE! The height of the shoulder belts is correct when the belt disappears into the shell slightly above your child’s shoulders (18).
•Adjust the height of the shoulder belts in combination with and by means of the headrest.
19• To move the shoulder belts and headrest to the required height, move the headrest by the handle on the top at the same time forwards and up or down (19). The shoulder belts including headrest can be set to 6 different heights.
English
10
