![](/images/new-backgrounds/1001454/1454141x1.webp)
Picture Adjust
Using Picture Adjust, you can adjust the picture quality and reduce any noise appearing on the screen.
Press ENTER to view the TV picture while setting when the video source is output to HDMI OUT MAIN. To return to the previous screen, press RETURN.
■Wide Mode*1*6
This setting determines the aspect ratio.
`4:3:
`Full:
`Zoom:
`Wide Zoom:
`Auto:
According to the input signals and monitor output setting, the AV receiver automatically selects the “4:3”, “Full”, “Zoom” or “Wide Zoom”
mode. See “Monitor Out” for details on the monitor output setting (➔ page 61).
■Picture Mode*1
`Custom:
All settings can be performed manually.
`Cinema:
Select when the picture source is a movie or alike.
`Game:
Select when the video source is a game console.
`Standard:
Does not adjust picture quality (changes resolution).
`Bypass:
Does not adjust picture quality (does not change resolution).
With “Picture Mode”, you can change the following settings to be suitable for the movie or game screen by one operation: “Game Mode”, “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue”, “Saturation” or “Color
Temperature”.
■Game Mode*2*3*4
`Off
`On
If video signal delay occurs during playback on a video component (i.e., game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor.
Advanced Operations
■Film Mode*2*4
`Video:
“Film Mode” detection is not applied and the input signal is handled as a video source.
`Auto:
Detects whether the input signal is a video or a movie. If it is a movie, the appropriate conversion is applied.
The AV receiver will adjust to the picture source, automatically converting it to the appropriate progressive signal and reproducing the natural quality of the original picture.
■Edge Enhancement*2*4*5
`Off
`Low
`Mid
`High
With this setting, you can make the picture appear sharper.
■Noise Reduction*2*4*5
`Off
`Low
`Mid
`High
With this setting, you can reduce noise appearing on the screen. Select the desired level.
■Brightness*1*2*4
`–50 to 0 to +50
With this setting, you can adjust the picture brightness.
■Contrast*1*2*4
`
With this setting, you can adjust contrast.
En-71
Operating procedure (➔ page 60)