Controlling Other
Components
You can use the AV receiver’s remote controller to control your other AV components, including those made by other manufacturers. This section explains how to enter the remote control code for a component that you want to control: DVD, TV, CD, etc.
See “Learning Commands” for learning commands directly from another component’s remote controller (➔ page 89).
See “Using Normal Macros” for programming ACTIVITIES to perform a sequence of remote control actions (➔ page 90).
Preprogrammed Remote Control Codes
The following REMOTE MODE buttons are preprogrammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.
For details on controlling these components, see the indicated pages.
BD/DVD Onkyo
Looking up for Remote Control Codes
You can look up for an appropriate remote control code from the
Note
•You need to connect your TV to the HDMI output (HDMI OUT MAIN) to make the following
1
2
3
4
5
6
7
8
Press RECEIVER followed by HOME.
Use e/ror q/wto select “Setup”, and then press ENTER.
Use q/wto select “Remote Controller Setup”, and then press ENTER.
Use q/wto select “Remote Mode Setup”, and then press ENTER.
Use q/wto select a remote mode, and then press ENTER.
The menu of category selection appears.
Use q/wto select a category, and then press
ENTER.
The keyboard screen for brand name input appears.
Use q/w/e/rto select a character, and then press ENTER.
Repeat this step for the first three characters of the brand name.
When you have entered the 3rd character, select “Search” and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use rto select “Not Listed”, and then press
ENTER.
The keyboard screen for brand name input appears.
Use q/wto select a brand, and then press
ENTER.
A remote control code with its instructions are displayed. Follow the procedure.
Controlling Other Components
9 If you can control the component, use q/wto select “OK”, and then press ENTER.
The
If you cannot control the component, use q/w to select “Try Next Code” and press ENTER.
The next code is displayed.
Entering Remote Control Codes
You’ll need to enter a code for each component that you want to control.
1 Look up the appropriate remote control code in the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD player, TV, etc.).
2 While holding down the REMOTE MODE button to which you want to assign a code, press and hold down DISPLAY (about 3 seconds).
The REMOTE MODE button lights.
Note
•Remote control codes cannot be entered for RECEIVER and the multi zone button.
•Only TV remote control codes can be entered for TV.
•Except for RECEIVER, TV, and the multi zone button, remote control codes from any category can be assigned for the REMOTE MODE buttons. However, these buttons also work as input selector buttons, so choose a REMOTE MODE button that corresponds with the input to which you connect your component. For example, if you connect your CD player to the CD input, choose TV/CD when entering its remote control code.
En-82
Operating procedure (➔ page 60)
