■Optical digital audio
Optical digital connections allow you to enjoy digital sound such as PCM*1, Dolby Digital or DTS. The audio quality is the same as coaxial.
■Coaxial digital audio
Coaxial digital connections allow you to enjoy digital sound such as PCM*1, Dolby Digital or DTS. The audio quality is the same as optical.
Connections
Connecting the Antennas
This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.
(North American | (European and |
models) | Australian models) |
Orange
■Analog audio (RCA)
Analog audio connections (RCA) carry analog audio.
White
Red
*1 For PCM signals, the supported sampling rates are 32/44.1/48/88.2/96 kHz. With HDMI connections, 176.4 and 192 kHz are also supported.
Note
• The AV receiver does not support SCART plugs. |
• The AV receiver’s optical digital jacks have |
covers that open when an optical plug is inserted and close |
when it’s removed. Push plugs in all the way. |
Caution |
Push. | Insert wire. | Release. |
Assembling the AM loop antenna
AM loop antenna (supplied)
Note
Insert the plug fully | Insert the plug fully |
into the jack. | into the jack. |
Caution
• Be careful not to injure yourself when using 
thumbtacks.
Thumbtacks, etc.
Indoor FM antenna (supplied)
• To prevent shutter damage, hold the optical plug |
straight when inserting and removing. |
•Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible reception.
•Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.
Tip
•If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
•If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna.
