Onkyo TXNR828 En-50, This mode expands 5.1-channel, Joint development between Dolby

*1

*2

*3

*4

*5

*6

*7

*8

Playback

Listening Mode		Description	Input	Speaker
			Source	Layout
		• THX Surround EX	D	V
	T H X S u r r E X
		This mode expands 5.1-channel	H
		sources for 6.1/7.1- channel playback.
		It’s especially suited to Dolby Digital EX
		sources. THX Surround EX, also
		known as Dolby Digital Surround EX, is
		a joint development between Dolby
		Laboratories and THX Ltd.

Note

Pure Audio cannot be selected when Zone 2/3 is active.

Besides, if you activate Zone 2/3 while Pure Audio is selected, the listening mode will automatically switch to Direct.

Based on the audio channel signal contained in the source, the corresponding speakers will output the sound.

The AV receiver can input the DSD signal from HDMI IN. Depending on the player, setting the output on the player side to PCM might bring better sound.

For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. DTS is used depending on the configuration of the AV receiver.

If there are no surround back speakers, DTS is used.

If there are no surround back speakers, Dolby Pro Logic II is used.

This listening mode can be selected only when all the following conditions are satisfied:

–Center speaker is connected.

–Either the front high or front wide speakers are connected.

En-50