■HDMI Through
`Off
`BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, AUX, TV/CD, PHONO:
Selects the input source for which the HDMI Through function is enabled.
`Last:
The HDMI Through function is activated on the input source selected at the time of setting the AV receiver to standby mode.
When enabling the HDMI Through function, regardless of whether the AV receiver is on or in standby, both audio and video streams from an HDMI input will be output to the TV or other components via HDMI connection. The HDMI indicator will be
This setting is fixed to “Auto” automatically when the above “HDMI CEC (RIHD)” setting is set to “On”, resulting in automatic input source selection.
Note
•Only an input source assigned to an HDMI IN via “HDMI Input” setting is enabled (➔ page 62).
•The power consumption in standby mode will increase during the HDMI Through function; however in the following cases, the power consumption can be saved:
–The TV is in standby mode.
–You are watching a TV program.
•Refer to the connected component’s instruction manual for details.
•Depending on the connected component, the correct input source may not be selected with the setting fixed to “Auto”.
•This setting is set to “Off” automatically when the “HDMI CEC (RIHD)” setting is set to “Off”.
•This function is only available for the HDMI OUT MAIN jack.
■Audio TV Out (Main)
`Off
`On
This preference determines whether the incoming audio signal is output from HDMI OUT MAIN. You may want to turn this preference on if your TV is connected to HDMI OUT MAIN and you want to listen to the audio from a connected component through your TV’s speakers. Normally, this should be set to “Off”.
Note
•If “On” is selected and the audio can be output from the TV, the AV receiver will output no sound through its speakers. In this case, “TV Speaker” appears on the AV receiver’s display by pressing DISPLAY.
•When “HDMI CEC (RIHD)” is set to “On”, this setting is fixed to “Auto”.
•This setting is fixed to “Off” when “Monitor Out” is set to “Sub” (➔ page 61).
•With some TVs and input signals, no sound may be output even when this setting is set to “On”.
•When “Audio TV Out (Main)” or “HDMI CEC (RIHD)” is set to “On” and you’re listening through your TV’s speakers, turning up the AV receiver’s volume control will make the sound be output from the AV receiver’s front left and right speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.
•Listening mode cannot be changed when this setting is set to “On” and the audio is output from the TV.
•If the audio signal from the player is not supported by the TV, the audio is not output from the TV even if this setting is enabled. When the audio cannot be output from the TV, (When “Monitor Out” is set to “Both”, the audio cannot be output form the TV connected to both HDMI OUT MAIN and HDMI OUT SUB) the audio is output from the speakers connected to the AV receiver.
Advanced Operations
■Audio TV Out (Sub)
`Off
`On
This preference determines whether the incoming audio signal is output from HDMI OUT SUB. You may want to turn this preference on if your TV is connected to HDMI OUT SUB and you want to listen to the audio from a connected component through your TV’s speakers. Normally, this should be set to “Off”.
Note
•If “On” is selected and the audio can be output from the TV, the AV receiver will output no sound through its speakers. In this case, “TV Speaker” appears on the AV receiver’s display by pressing DISPLAY.
•This setting is fixed to “Off” when “Monitor Out” is set to “Main” (➔ page 61).
•When “Monitor Out” is set to “Both” (➔ page 61), and this setting is enabled, set audio output of source component to 2ch PCM.
•With some TVs and input signals, no sound may be output even when this setting is set to “On”.
•When “Audio TV Out (Sub)” is set to “On” and you’re listening through your TV’s speakers, turning up the AV receiver’s volume control will make the sound be output from the AV receiver’s front left and right speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.
•Listening mode cannot be changed when this setting is set to “On” and the audio is output from the TV.
•When “Monitor Out” is set to “Both” (➔ page 61) and only “Audio TV Out (Sub)” is set to “On”, the audio is not output from the TV connected to HDMI OUT SUB except in the case the audio input is via HDMI.
•If the audio signal from the player is not supported by the TV, the audio is not output from the TV even if this setting is enabled. When the audio cannot be output from the TV, (When “Monitor Out” is set to “Both”, the audio cannot be output form the TV connected to both HDMI OUT MAIN and HDMI OUT SUB) the audio is output from the speakers connected to the AV receiver.
En-75
Operating procedure (➔ page 60)
