Resetting the Remote Controller
Controlling Other Components
Controlling Apple TV
You can reset the remote controller to its default settings.
1 While holding down RECEIVER, press and |
hold down HOME until RECEIVER lights |
(about 3 seconds). |
Within 30 seconds, press RECEIVER again. |
By programming the supplied remote controller with the appropriate remote control code, you can use it to operate your Apple TV.
Use the following remote control codes:
`02615: Apple TV
*1 The psupported by the AV receiver is the CEC system control function of the HDMI standard.
2 |
RECEIVER flashes twice, indicating that the |
remote controller has been reset.
Controlling Other Components
By pressing the REMOTE MODE button that’s been programmed with the remote control code for your component, you can control your component as described below.
For details on entering a remote control code for other components, see “Entering Remote Control Codes”
(➔ page 82).
Controlling a TV
TV is preprogrammed with the remote control code for controlling a TV that supports the p*1 (limited to some models). The TV must be able to receive remote control commands via pand be connected to the AV receiver via HDMI. If controlling your TV via pdoesn’t work very well, program your TV’s remote control code into TV and use the TV remote mode to control your TV. Use the following remote control codes:
`11807/13100/13500: TV with p
Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the appropriate remote control code, you can use it to operate your
Connect your
Use the following remote control codes:
(North American models)
`33101:
(European and Australian models)
`32910:
Note
•With some mobile devices, reliable operation cannot be guaranteed.
Controlling a
BD/DVD is preprogrammed with the remote control code for controlling a component that supports the p*1 (limited to some models). The component must be able to receive remote control commands via
pand be connected to the AV receiver via
HDMI.
Use the following remote control codes:
`32910/33101/33501/31612:
