Remote Control Codes
/ 
Remote Control Codes
1 While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds).
The REMOTE MODE button/Remote indicator lights.
On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display” button.
Notes:
•Remote control codes cannot be entered for [RECEIVER] and the multi zone button.
•Only TV remote control codes can be entered for [TV].
•Except for [RECEIVER], [TV], and the multi zone button, remote control codes from any category can be assigned for the REMOTE MODE buttons. However, these buttons also work as input selector buttons, so choose a REMOTE MODE button that corresponds with the input to which you connect your component. For example, if you connect your CD player to the CD input, choose [TV/CD] when entering its remote control code.
2 Within 30 seconds, use the number buttons to enter the
The REMOTE MODE button/Remote indicator flashes twice.
If the remote control code is not entered successfully, the REMOTE MODE button/Remote indicator will flash once slowly.
Notes:
•The flashing element of the remote controller will differ according to your AV receiver’s model.
•The remote controller is preconfigured with remote controller presets of different components. By entering a code from the Remote Control Code list, you can activate the relevant preset for that component.
•When there are multiple codes related to one manufacturer, try and enter them
•Depending on the model and year of your component, compatibility is not guaranteed.
•With some models, the remote controller may not not work or its compatibility may be limited to part of the component’s functionality.
•Besides, it is not possible to add new codes to the existing remote controller presets.
•Though the provided remote control codes are correct at the time of printing, they are subject to change by the manufacturer.
1
