Maxi-Cosi Priori manual Forward-Facing Installation with Latch Belt

4358-4274 US Priori 5/25/07 8:33 AM Page 41

Forward-Facing Installation with LATCH Belt

NOTE: Do not use the LATCH system along with the adult lap or lap/shoulder belt.

4	Fasten one
	LATCH belt
	connector to the
	anchor in the
	vehicle seat
	located in the
	vehicle seat bight.
	Repeat for other
	side of child

Forward-Facing Use:

1

2

Recline child restraint. To thread the LATCH belt, put belt end with connector and adjuster through the forward -facing belt path slot.

Adjuster MUST be on the left side of child restraint as shown. DO NOT twist belt.

	restraint. See
	your vehicle
	owner’s manual
	for more
	information.
5	NOTE: Make sure
	arrows on
	connectors are
	facing up.
6	Place one knee
	in the child
	restraint and
	push down firmly
	while pulling up
	on loop end of
	the LATCH belt
	to tighten.

With knee still in child restraint, attach hook to

22-40 lbs. (10.1-18 kg), 34-43” (85.1-110 cm), Over 1 year

3	Place child restraint
	flush against the
	back of the vehicle
	seat forward-facing
	in the back seat.

anchor in vehicle. Push down firmly and tighten top anchorage strap.

To adjust top anchorage strap: See “Adjusting Top Anchorage Strap” section.

of age.

38 39 continued on next page.