0114_GBA_cabriofix_I_BW 15-03-2006 12:30 Pagina 15

5.GENERAL

5.1Carrying handle positions

• The carrying handle can be adjusted into 3 positions.

20• Press the buttons on both sides of the carrying handle at the same time and then adjust the carrying handle to the desired position (20). The buttons will pop up again once the handle is in place.

1. Carrying position/driving position

2.

Sleeping position/rocking position

GB

3.

Sitting position

 

5.2

Sun canopy

 

The sun canopy is located in the rim of the shell.

• Place the carrying handle in the carrying position.

21• Open the rim by pushing the button at the back under the rim (21) and releasing it.

22• The sun canopy is now visible in the opening (22).

23• Pull it out and place the ends of the sun canopy with the buttonholes over the hooks on the carrying handle (23).

24• When storing the sun canopy, make sure you place it in the rim carefully and close the rim properly (click) (24).

Important! The Maxi-Cosi CabrioFix is sometimes carried by the rim, therefore check that it is closed properly.

5.3 Attaching the Maxi-Cosi CabrioFix to the Maxi-Taxi or Quinny frame

25• Unfold the frame and place the Maxi-Cosi CabrioFix with the upper section in the direction of traffic on the adapters of the unfolded frame until the Maxi-Cosi CabrioFix clicks into place (25).

Check to make sure the Maxi-Cosi CabrioFix is attached securely.

5.4 Removing the Maxi-Cosi CabrioFix from the Maxi-Taxi or Quinny frame

• Place your thumbs on the control buttons on both sides of the Maxi-Cosi CabrioFix.

26• Push in the buttons while lifting the Maxi-Cosi CabrioFix from the frame (26).

Instructions for use

15

 

Page 11
Image 11
Maxi-Cosi THE SAFE WORLD OF I manual General, Carrying handle positions, Carrying handle can be adjusted into 3 positions