ASSEMBLING AND PREPARING 13
Adjusting the Angle
This monitor meets the specifications for the wall mount plate or other compatible devices.
1Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth.
2Place the wall mount plate onto the monitor and align it with the screw holes.
3Tighten the four screws to fix the plate to the monitor using a screwdriver.
Wall mount plate
Installing on the Wall
Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
10 cm
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1Use the screws and wall mounting bracket that conform to VESA standards.
ENGLISH
NOTE
yy The wall mount plate is sold separately.
yy For more information on installation, refer to the wall mount plate's installation guide.
yy Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen
2If you use screws longer than the standard length, it may damage the inside of the product.
3A
4VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.
5Use the wall mount plate and fixing screws that conform to VESA standards as specified below.
yy 784.8 mm or less
*Thickness of the wall mount plate: 2.6 mm
*Fixing screw: Diameter 4.0 mm x Pitch 0.7
mmx Length 10 mm
yy 787.4 mm or more
Use the wall mount plate and screws that conform to VESA standards.
