Detaching the Stand Base, Body | LG Electronics 27MB85RB specs

8ASSEMBLING AND PREPARING

ENGLISH

Detaching the Stand Base

1Place the screen face down.

CAUTION

yy To protect the screen from scratches, cover the surface with a soft cloth.

2BodyTurn the screws on the Stand Base to the left to detach the Stand Base from the Stand

Body.

CAUTION

yy The components in the illustrations may differ from the actual product.

yy Do not carry the monitor upside down, as this may cause it to fall off its stand and result in damage or injury.

yy To avoid damaging the screen when lifting or moving the monitor, only hold the stand or the plastic cover. This avoids putting unnecessary pressure on the screen.

Installing on to a Table

1Lift the monitor and place it on the table in an upright position.

Place at least 10 cm away from the wall to ensure sufficient ventilation.

10 cm

10 cm

10 cm

10 cm

2Connect the Power Cord to a wall outlet.

3Press the (Power) button on the bottom of the monitor to turn it on.

CAUTION

yy Disconnect the power cord first, and then move or install the Monitor set. There is risk of electric shock.

Image 8

LG Electronics 27MB85RB owner manual Detaching the Stand Base, Installing on to a Table, Place the screen face down, Body

Contents

IPS LED Monitor LED Monitor Contents License Power Cord Cable Holder DVI-D Dual Cable Guide book / Card Assembling and PreparingProduct Composition Calibrator ACB8300 Depending On Country Touch buttons Input ConnectorComponent and Button Description When moving or lifting the monitor, follow these Moving and Lifting the MonitorInstructions to prevent the monitor from being Scratched or damaged and to ensure safe trans Installing the Monitor Assembling the Stand BaseAlign the hole on the Stand Base with Stand Body and push it all the way up.Turn Installing on to a Table Detaching the Stand BasePlace the screen face down Body 130.0 mm HeadLocking pin Gather and bind the cables with the supplied cable Holder Adjusting the Stand Height Tidying CablesRear Side Front Side Pivot Feature Head Stand Using the Kensington Lock Detaching the stand body Wall mount plate Adjusting the AngleInstalling on the Wall Model Vesa a x BStand Screw Required Screws Wall Mount Plate Connecting to a PC Hdmi Connection DVI Connection DisplayPort Connection Connecting AV Devices Thunderbolt Connection Connecting Peripherals USB Cable Connection PCUSB port on the product functions as a USB hub HDMI/DP DisplayPort Connection Headphone Port Connection Angle Type Straight Type Installing LG Monitor Software LG Monitor Software installation starts as Shown below System English Monitor buttons Customizing SettingsActivating the Main Menu Contrast Volume Input Ratio Customizing SettingsMenu Settings Wide Original Back Exit Each option is described below Ratio SettingsPress OK to select Ratio Super Energy Saving SES Settings Off Disables the Super Energy Saving SES functionOff Back Exit Each option is described below Menu Description Each option is described below Mode SettingsPress or to go to Mode PIP settings English Back Exit PicturePress or to go to Picture Press OK to select Picture Red Green Blue Six Color Reset Back Exit ColorPress or to go to Color Press OK to select Color Gamma Settings Press or to go to Settings Press OK to select SettingsLanguage Main Audio Button Power LED Back Exit Sound Each option is described below Yy Check that the connected input is enabled Menu Input TroubleshootingYy Check the power indicator Display color is abnormal Panel Display Settings Color QualityOr reinsert the PCs video card Specifications 27MB85Z 27MB85R Factory Support Mode Preset Mode PC Power IndicatorSUB/DVI DTV modes interlace mode are not supported Hdmi Timing Video Proper Posture Page Model Serial No