HSDPA Standard At Commands Page 13 of 60 Version 1.2
4800, 9600, 19200), (45, 50, 75, 110, 150, 300, 600, 38400,
57600, 115200, 230400)
+IPR=<value> Set value
+ICF Opt.
TE2-MT2 Character Framing. This extended-format
compound parameter is used to determine the local serial
port start-stop (asynchronous) character framing that the
MT2 shall use while accepting TE2 command set and while
transmitting information text and result codes to the TE2, if
this is not automatically determined (see +IPR).
+ICF? Shows current settings
+ICF=? Shows supported range
+ICF=<format_value,parity_value> sets value
<format> valid numeric values
0 auto detect [NOT SUPPORTED]
1 8Data 2Stop
2 8Data 1Parity 1Stop
3 8Data 1Stop (Default)
4 7Data 2Stop
5 7Data 1Parity 1Stop
6 7Data 1Stop
<parity> defined numeric values
0 odd
1 even
2 Mark [NOT SUPPORTED]
3 space (Default)
supported
+IFC Opt.
TE2-MT2 Local Flow Control. This extended-format
compound parameter is used to control the operation of
local flow control between the TE2 and MT2 [1].
<c_by_t> Description
0 None
1 Xon/Xoff local
DC1/DC3 on circuit 103; do not pass
DC1/DC3 characters to the remote
DCE.
2 Circuit 133 (Ready for Receiving)
(Default)
supported