HSDPA Standard At Commands Page 50 of 60 Version 1.2
<Delivery order>s) ,(list of supported <Maximum
SDU size>s) ,(list of supported <SDU error
ratio>s) ,(list of supported <Residual bit error
ratio>s) ,(list of supported <Delivery of
erroneous SDUs>s) ,(list of supported <Transfer
delay>s) ,(list of supported <Traffic handling
priority>s)
[…]]
Value <cid>: a numeric parameter which specifies a particular PDP
context definition (see +CGDCONT and +CGDSCONT
commands).
T
he following parameters are defined in 3GPP TS 23.107
[46] -
<Traffic class>: a numeric parameter that indicates the type
of application for which the UMTS bearer service is optimised.
0 - conversational
1 - streaming
2 - interactive
3 - background
Other values are reserved.
<Maximum bitrate UL>: a numeric parameter that indicates
the maximum number of kbits/s delivered to UMTS (up-link
traffic) at a SAP. As an example a bitrate of 32kbit/s would be
specified as '32' (e.g. AT+CGEQMIN=…,32, …) (refer TS
24.008 [8] subclause 10.5.6.5).
<Maximum bitrate DL>: a numeric parameter that indicates
the maximum number of kbits/s delivered by UMTS (down-link
traffic) at a SAP. As an example a bitrate of 32kbit/s would be
specified as '32' (e.g. AT+CGEQMIN=…,32, …) (refer TS
24.008 [8] subclause 10.5.6.5).
<Guaranteed bitrate UL>: a numeric parameter that
indicates the guaranteed number of kbits/s delivered to UMTS
(up-link traffic) at a SAP (provided that there is data to deliver).
As an example a bitrate of 32kbit/s would be specified as '32'
(e.g. AT+CGEQMIN=…,32, …) (refer TS 24.008 [8] subclause
10.5.6.5).
<Guaranteed bitrate DL>: a numeric parameter that
indicates the guaranteed number of kbits/s delivered by UMTS
(down-link traffic) at a SAP (provided that there is data to
deliver). As an example a bitrate of 32kbit/s would be specified
as '32' (e.g. AT+CGEQMIN=…,32, …) (refer TS 24.008 [8]
subclause 10.5.6.5).
<Delivery order>: a numeric parameter that indicates
whether the UMTS bearer shall provide in-sequence SDU
delivery or not.
0 - no
1 - yes