HSDPA Standard At Commands Page 28 of 60 Version 1.2
value <fac> values reserved by the present document:
"CS" CNTRL (lock CoNTRoL surface (e.g. phone keyboard))
"PS" PH-SIM (lock PHone to SIM/UICC card) (MT asks password when
other than current SIM/UICC card inserted; MT may remember certain
amount of previously used cards thus not requiring password when they
are inserted)
"PF" lock Phone to the very First inserted SIM/UICC card (also referred in the
present document as PH-FSIM) (MT asks password when other than the
first SIM/UICC card is inserted)
"SC" SIM (lock SIM/UICC card) (SIM/UICC asks password in MT power-up
and when this lock command issued)
"AO" BAOC (Barr All Outgoing Calls) (refer 3GPP TS 22.088 [6] clause 1)
"OI" BOIC (Barr Outgoing International Calls) (refer 3GPP TS 22.088 [6]
clause 1)
"OX" BOIC-exHC (Barr Outgoing International Calls except to Home
Country) (refer 3GPP TS 22.088 [6] clause 1)
"AI" BAIC (Barr All Incoming Calls) (refer 3GPP TS 22.088 [6] clause 2)
"IR" BIC-Roam (Barr Incoming Calls when Roaming outside the home
country) (refer 3GPP TS 22.088 [6] clause 2)
"NT" barr incoming calls from numbers Not stored to TA memory
"NM" barr incoming calls from numbers Not stored to MT memory
"NS" barr incoming calls from numbers Not stored to SIM/UICC memory
"NA" barr incoming calls from numbers Not stored in Any memory
"AB" All Barring services (refer 3GPP TS 22.030 [19]) (applicable only for
<mode>=0)
"AG" All outGoing barring services (refer 3GPP TS 22.030 [19]) (applicable
only for <mode>=0)
"AC" All inComing barring services (refer 3GPP TS 22.030 [19]) (applicable
only for <mode>=0)
"FD" SIM card or active application in the UICC (GSM or USIM) fixed
dialling memory feature (if PIN2 authentication has not been done
during the current session, PIN2 is required as <passwd>)
"PN" Network Personalization (refer 3GPP TS 22.022 [33])
"PU" network sUbset Personalization (refer 3GPP TS 22.022 [33])
"PP" service Provider Personalization (refer 3GPP TS 22.022 [33])
"PC" Corporate Personalization (refer 3GPP TS 22.022 [33])
<mode>:
0 unlock
1 lock
2 query status
<status>:
0 not active
1 active
<passwd>: string type; shall be the same as password specified for the facility
from the MT user interface or with command Change Password +CPWD
<classx> is a sum of integers each representing a class of information
(default 7):
1 voice (telephony)
2 data (refers to all bearer services; with <mode>=2 this may refer only to
some bearer service if TA does not support values 16, 32, 64 and 128)
4 fax (facsimile services)
8 short message service
16 data circuit sync
32 data circuit async
64 dedicated packet access
128 dedicated PAD access