2
Proceed to Section 2.3 now if you have every-
thing required.
If you have neither 2A or 2B above, you have two
options to provide Plug and Play functionality to your
PC.
1. Install Windows 95

or,

2. If running DOS or Windows 3.x, configure the
modem using the included modem driver. Instructions
for installing this driver are included in the text file
called README.1ST on the Windows 95 driver disk.
The README.1ST file can be viewed by loading
it into any wordprocessor or any text editor (i.e. DOS
EDIT, NOTEPAD). It may also be viewed by using the
DOS TYPE command. Refer to your word processor
manual or DOS/Windows references for information
on loading text files.
2.3 Hardware Installation
Installation of this modem requires opening and
manipulating your PC. Exercise caution at all times
when working with AC powered and static-sensitive
equipment. Turn off and unplug your PC before instal-
lation. Discharge any static electricity from your body
by touching any bare metal surface of the PC system,
such as its power supply cover.
1. Turn off and unplug your computer from the AC
outlet.
2. Remove your computer's cover (refer to your
computer's owner's manual).
3. Select any available half-card slot, and then re-
move the slot cover (refer to Figure 2-1).
Figure 2-1 Expansion Slots