INSTALLATION AND CONNECTION | ELX8 |
8.2. Setting Date & Time
(1)Press [MENU] button, and select “Quick Setup ” tab.
(2)Select “Date/Time” and enter the Settings Page by pressing [ENTER].
8.2.1. Time Zone
(1)Select “Time Zone” and press [ENETR] button to configure.
(2)Select a value using the [ / ] button and press the [EXIT] button when finished.
8.2.2. Daylight Saving
(1)“Daylight Saving Time” is only activated for time zones that use Daylight Savings. If activated, press [ENTER] to enter a new value.
(2)Select “On/Off” using the [ / ] but ton and press the [EXIT] button when finished.
8.2.3. Sync with NTP
In order to synchronize time with NTP (Network Time Protocol) server, select “On”.
(1)Select “Sync with NTP ” using the [ / ] or the [/] buttons and press [ENTER] button.
(2)Select “On/Off” using the [ / ] button and press the [EXIT] button.
Rugged CCTV | 2003. 08. 13 (v 1.0) | 23 |
