ELX8 -60

INSTALLATION AND CONNECTION

(1)Press [ENTER] button at “Select Disk”.

(2)Select new added HDD (indicated as “[F] ”) using [￿/￿] button and press [EXIT] button

(3)Select “Action” using [￿/￿] button and press [EXIT] button.

(4)Select “Add” using [￿ ￿ / ￿ ￿ ] button and press [EXIT] button.

(5)Select “Apply ” using [￿/￿] button and press [EXIT] button. The HDD status is changed to “[*] ”.

(6)Select “Action” using [￿/￿] button and press [EXIT] button.

(7)Select “Format ” using [￿ ￿ / ￿ ￿ ] button and press [EXIT] button.

(8)Select “Apply ” using [￿/￿] button and press [EXIT] button. The HDD status is changed to “[R]” after formatting.

(9)Shut down “Disk Manager” by pressing [EXIT] button.

15. Network Monitoring & Managing

ELX8-60 can be accessed, controlled, and managed from remote site via Internet/Intranet.

15.1. Connecting Ethernet

(1)Turn off ELX8-60’s power switch.

(2)Connect ELX8 -60 to hub with Ethernet cable.

(3)Turn on ELX8 -60’s power switch.

38

2003. 08. 13 (v 1.0)

Rugged CCTV

Page 38
Image 38
Maxtor ELX8-60 manual Network Monitoring & Managing, Connecting Ethernet