Maxtor ELX8-60 manual Setting Sensor at OSD menu

ELX8 -60 INSTALLATION AND CONNECTION

9.2. Setting Sensor at OSD menu

(1)	After a sensor is connect ed, it can be activated through the OSD Configuration menu.
(2)	Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. Use the [￿ ￿ /

￿ ￿ ] buttons to select “On” or “Off.” Press [EXIT] when finished.

(3)When activated, the “Pre / Post Alarm” function will cause the ELX8-60 to record images at the specified Speed and Quality for a length of time before and/or after the sensor is triggered.

28 2003. 08. 13 (v 1.0) Rugged CCTV