To Battery + 12 Volts VIA Fuse Remote TURN-ON

P900.4 / P1100.4 / P1400.4 / 4 CHANNEL AMPLIFIER APPLICATIONS

2 way active, or bi-amplified system with mono bass

This application shows how easily a 2 way active system can be implemented using a 4 channel amplifier. Channels 1 and 2 will be used for highs, and channels 3 and 4 for mono bass.

Interconnect cable checklist:

- We need to feed the same signal to both sets of channels, so must use 2 Y- adapters, one to feed the LEFT signal to channels 1 and 3, and the right signal to channels 2 and 4, as shown.

Mono bass woofer wiring:

-Connect the mono speaker positive terminal to the LEFT +, and its negative terminal to RIGHT -.

Switch setting checklist:

-1/2CH X-OVER: HP

-3/4CH X-OVER: LP

Channels 3/4:

-HI PASS (subsonic): 20 Hz

-LOW PASS: 100 Hz

Please note that these frequency points are suggestions only. Refer to the loudspeaker manufacturer specifications and the section “Setting up systems after installation for best performance”

Level control checklist:

Refer to the section “Setting up systems after installation for best performance”

Minimum final loudspeaker impedances:

-2-Ohms per channel in stereo mode.

-4-Ohms mono bridged.

Crossover frequency control checklist: Channels 1/2:

-HI PASS: 100 Hz

-LOW PASS: N/A

MONO

BASS

SPEAKER

STEREO

HIGHS

SPEAKERS

LEFT TO

CHANNELS

1 AND 3

RIGHT TO

CHANNELS

3 AND 4

	CH3/4		L
	CH3/4					LINE
	CH1/2					INPUT
	CH1		+ - g	HI I		CH3
	CH2		- +	UT	- +	CH4
	5V 0.2V		LEVEL		5V 0.2V	LEVEL
CHANNEL 1 / 2	0dB 12dB 60Hz 1.2KHz		BASS EQ HPF		0dB 12dB 60Hz 1.2KHz	BASS EQ HPF	CHANNEL 3 / 4
	30Hz 250Hz		LPF		30Hz 250Hz	LPF
	FULL LPF HPF		X-OVER	FULL LPF HPF		X-OVER
	LINE			CHANNEL	2 3 4	MODE
	OUTPUT	L			R

	OUTPUT	LEFT -+
	3/4 SPEAKER	IGHT+ -
	CH	-
FUSE
POWER INPUT	GND REM +12V
	OUTPUT	LEFT-
	½ SPEAKER	IGHT+ -
	CH	-
	POWER	PROTECT

BRIDGED

B IDGE

TO BATTERY + 12 Volts VIA FUSE REMOTE TURN-ON

CHASSIS GROUND

2 way active, or bi-amplified system with mono bass, and faded highs/lows

Here we present a variation of the previous system. Since this is a 2 way system, we can use the front outputs from a head unit to drive the highs, and the rear output to drive the bass This method allows the listener to easily adjust the relative levels of bass to highs, with the front to rear fade on the head unit.

Channels 1 and 2 will be used for highs, and channels 3 and 4 for mono bass.

Interconnect cable checklist:

-Use good quality RCA leads to connect the inputs of the amplifier to the source as shown.

-Follow the instructions as per the previous system for switch and crossover settings.

MONO				STEREO
BASS				HIGHS
BASS				HIGHS
SPEAKER				SPEAKERS

FULL RANGE

STEREO LINE

INPUTS

	CH3/4		L
	CH3/4					LINE
	CH1/2					INPUT
	CH		+ -	HI	-	CH3
	CH2		nd - +	PUT	nd - +	CH4
	5V 0.2V		LEVEL		5V 0.2V	LEVEL
CHANNEL 1 / 2	0dB 12dB 60Hz 1.2KHz		BASS EQ HPF		0dB 12dB 60Hz 1.2KHz	BASS EQ HPF	CHANNEL 3 / 4
	30Hz 250Hz		LPF		30Hz 250Hz	LPF
	FULL LPF HPF		X-OVER	FULL LPF HPF		X-OVER
	LINE			CHANNEL	2 3 4	MODE
	OUTPUT	L			R

	OUTPUT	LEFT -
	CH 3/4 SPEAKER	RIGHT+ -
FUSE
POWER INPUT	GND REM +12V
	OUTPUT	LEFT-
	½ SPEAKER	IGHT -
	CH	-
	POWER	PROTECT

BRIDGED

TO BATTERY + 12 Volts VIA FUSE REMOTE TURN-ON

CHASSIS GROUND

P500.2, P1100.2, P1400.2 specifications

Maxxsonics is known for producing high-quality audio equipment and their series of amplifiers, including the P1400.2, P1100.2, and P500.2, are testaments to their commitment to delivering powerful sound solutions for car audio enthusiasts. Each model in this series comes with distinct features and technologies that cater to various audio needs.

The Maxxsonics P1400.2 is a high-performance 2-channel amplifier that delivers an impressive 1400 watts of peak power. This model is designed for those who demand deep bass and crisp highs. One of its standout features is the variable gain control, allowing users to fine-tune the input levels, which enhances the audio quality and prevents distortion. Additionally, it has built-in high and low-pass filters that enable customization of sound frequencies, ensuring that users can achieve their desired audio profile.

Next in line is the P1100.2, which offers a robust output of 1100 watts. This amplifier is perfect for powering mids and highs, making it an ideal choice for users who want to enhance their listening experience without overwhelming bass. The P1100.2 also incorporates a smart thermal management system that prevents overheating, ensuring reliability even during long listening sessions. Furthermore, its compact design makes installation easier without compromising on performance.

Finally, the P500.2 is the most compact model in the series, yet it does not fall short on power. With a peak output of 500 watts, it serves as an excellent option for smaller sound systems or for users looking to enhance specific components without the need for a larger amplifier. The P500.2 features an advanced circuitry design that provides efficient power management and minimizes energy loss, which translates into clean sound reproduction across all volume levels.

All three models in the Maxxsonics P-series boast durable construction, featuring robust chassis designs that are built to withstand the environmental stresses often encountered in automotive applications. Moreover, installation is straightforward, thanks to user-friendly setups and clear instructions.

In summary, the Maxxsonics P1400.2, P1100.2, and P500.2 amplifiers collectively showcase the brand's dedication to performance and innovation in audio technology. Each amplifier is tailored to meet specific audio preferences, making them solid choices for anyone looking to elevate their car audio experience.

Maxxsonics P1400.2, P500.2 manual Way active, or bi-amplified system with mono bass, Chassis Ground

Models: P500.2 P1100.2 P1400.2

2 way active, or bi-amplified system with mono bass

TO BATTERY + 12 Volts VIA FUSE REMOTE TURN-ON

CHASSIS GROUND

P500.2, P1100.2, P1400.2 specifications