Now start...
with oven in kitchen.
1n Remove shipping materials, tape, and protective film from oven. Do Not remove shipping base at this time.
2 n Remove the racks and other parts from inside the oven.
Personal Injury Hazard
l Use both hands to remove oven doors l Grasp only the sides of oven doors.
l Do Not use handle or any portion of the front frame or trim for lifting.
l Because of the weight and size of the ovens, two or more people are needed to move and safely install the ovens.
Failure to properly grasp the oven doors or to lift ovens properly could result in damage to the product or personal injury.
2
d n Completely open the lower oven door. Remove the two oven door screws, (Not all models have oven door screws,)
4 n Close lower or single oven door to the broil position. Grasp the sides of the oven door and pull the door up and out of the hinge slots to remove. Set door
aside.
I
5 m Repeat Steps 3 and 4 for upper oven.
Property Damage
Before moving ovens across floor, check that ovens are on shipping
base or slide ovens onto cardboard or hardboard.
Failure to follow these instructions may result in damage to floor covering.
-
6 n Turn power supply off. Move oven close to final position. Remove and discard shipping base. Feed appliance cable through the opening in cabinet. Make electrical connection. See “Electrical requirements” and “Electrical
connection” sections, Panel C.
Product Damage
Carefully push against the seal area of the oven front frame when pushing the oven into the cabinet.
Do Not push against outside edges.
Failure to follow these instructions can result in damage to oven finish.
7n Lift oven up into cabinet cutout using the oven opening as an area to grip.
Push against seal area of front frame to push oven into cabinet.
4 screwS
8 H Center oven into cabinet cutout. Use two screws (four screws for a double oven) through the mounting holes in the front frame of the oven to secure the oven to the cabinet. Do Not
Use one
9 n Install the lower vent grille using the three screws provided.
1.
