Troubleshooting
PROBLEM | SOLUTION | |
Smoothtop surface shows | • | Tiny scratches or abrasions. |
wear. |
| - Make sure cooktop and pan bottom are clean. Do not slide glass or metal pans |
|
| across top. Make sure pan bottom is not rough. Use the recommended |
|
| cleaning agents. See page 18. |
| • | Metal marks. |
|
| - Do not slide metal pans across top. When cool, clean with Cooktop |
|
| Cleaning Creme. See page 18. |
| • Brown streaks and specks. | |
|
| - Remove spills promptly. Never wipe with a soiled cloth or sponge. Make sure |
|
| cooktop and pan bottom are clean. |
| • Areas with a metallic sheen. | |
|
| - Mineral deposits from water and food. Use recommended cleaning agents. |
|
| See page 18. |
| • | Pitting or flaking. |
|
| - Remove sugary boilovers promptly. See page 18. |
|
|
|
Moisture collects on oven | • | This is normal when cooking foods high in moisture. |
window or steam comes from | • | Excessive moisture was used when cleaning the window. |
oven vent. |
|
|
|
|
|
There is a strong odor or light | • | This is normal for a new range and will disappear after a few uses. Initiating a clean |
smoke when oven is turned on. |
| cycle will “burn off” the odors more quickly. |
| • Turning on a ventilation fan will help remove the smoke and/or odor. | |
| • Excessive food soils on the oven bottom. Use a | |
|
|
|
Fault Codes | • | BAKE or LOCK may flash rapidly in the display to alert you if there is an error |
|
| or a problem. If BAKE or LOCK appear in the display, press CANCEL pad. |
|
| If BAKE or LOCK continue to flash, disconnect power to the appliance. |
|
| Wait a few minutes, and then reconnect power. If the flashing still continues, |
|
| disconnect power to the appliance and call an authorized servicer. |
| • If the oven is heavily soiled, excessive flareups may result in a fault code during | |
|
| cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out |
|
| excess soil, then reset the clean cycle. If the fault code reappears, contact an |
|
| authorized servicer. |
|
|
|
Noises may be heard. | • | The oven makes several low level noises. You may hear the oven relays as they go on |
|
| and off. This is normal. |
| • As the oven heats and cools, you may hear sounds of metal parts expanding and | |
|
| contracting. This is normal and will not damage your appliance. |
|
|
|
There are no beeps and | • | Control may be in Sabbath Mode. See page 13. |
no display. |
|
|
|
|
|
22
