Looking Inside

Fresh Food Compartment

Shelves

Full Width Shelves: Some models have full width

shelves that rest on linear support rails. To remove: pull the shelf forward until it stops, lift the front and pull the shelf straight out. To reinstall, reverse this procedure.

Adjustable Shelves: Cantilever shelves may be available with your refrigerator. To remove a shelf, slightly lift up the rear of the shelf and pull straight out. To lock the shelf into another position, tilt up the front edge of the shelf. Insert the hooks into the desired frame openings and let the shelf settle into place, making sure the shelf is securely locked at the rear. On certain models the outside edge of the shelf rests on rails formed into the side of the refrigerator cabinet.

shelf style may vary

WARNING — Never attempt to adjust a shelf that is loaded with food (except in the case of the Elevator™ Shelf).

Elevator™ Shelf (select models)

The fresh food compartment may be equipped with an Elevator™ Shelf. This shelf has a spill retainer edge for easy cleanup. It also has the convenient slide out feature that allows easy access to items stored at the rear of the shelf.

This shelf can be adjusted up or down without being unloaded.

To adjust an Elevator™ Shelf, pull out the knob on the crank handle. Rotate the crank clockwise to raise the height of the shelf, and counterclockwise to lower the height of the shelf.

To remove the Elevator™ shelf for occasional cleaning, completely unload the shelf and pull the shelf forward. When the shelf stops, press up on the tabs located underneath its outside edges, then continue pulling forward, clear of the frame. To reinstall, align the shelf to the frame and push it all the way back. (There is no need to depress the tabs for reinstallation).

In ordinary use, the Elevator™ shelf with the frame assembly does NOT require removal. Though unlikely, and not recommended, the correct removal procedure is as follows: Unload the shelf completely and raise the shelf to its highest possible position. While supporting the shelf and frame from the front, press both locks inward. Lift slightly and tilt the frame assembly to allow the rear guides to clear the vertical rails. The entire assembly can then be moved forward and clear of the refrigerator compartment. To reinstall, tilt the frame assembly while depressing both locks, reposition the rear guide behind the vertical rails. When the shelf is level, release the locks allowing the shelf to latch into the correct position.

5

Page 5 Page 7
Page 6
Image 6
Maytag 61005299 warranty Looking Inside, Fresh Food Compartment, Shelves, Elevator Shelf select models
Page 5 Page 7

61005299 specifications

The Maytag 61005299 is a highly regarded appliance part that plays a crucial role in ensuring the efficiency and functionality of various Maytag laundry machines. As a replacement part, it is tailored specifically for compatibility with a range of washing machines and dryers, ensuring users can maintain optimal performance and reliability.

One of the key features of the Maytag 61005299 is its durability. Constructed from high-quality materials, this part is designed to withstand the wear and tear of everyday use, providing users with a long-lasting solution. This durability is especially important for appliances that undergo heavy usage, making the 61005299 an essential component in maintaining the longevity of your laundry machines.

The Maytag 61005299 is equipped with advanced technologies that streamline maintenance and repair processes. It incorporates user-friendly design principles, allowing for straightforward installation. This feature is particularly beneficial for DIY enthusiasts or those who prefer to handle minor repairs independently. Its compatibility with a wide range of models further enhances its appeal, making it a versatile choice for various household settings.

Moreover, the Maytag 61005299 engages with Maytag's commitment to efficiency and performance. It helps optimize the functioning of washing machines and dryers, enhancing energy efficiency and water usage. This not only contributes to lower utility bills but also aligns with modern consumers' increasing focus on sustainability.

In addition to its functional benefits, the design of the Maytag 61005299 reflects the brand's dedication to quality and reliability. It has undergone rigorous testing to meet precise performance standards, ensuring that it upholds Maytag's reputation for exceptional appliances.

Overall, the Maytag 61005299 stands out as a critical component of Maytag's laundry equipment lineup. With its robust construction, user-friendly design, and performance-enhancing features, this part enables users to carry out maintenance with ease while ensuring their appliances continue to operate efficiently. For anyone seeking a reliable solution for their Maytag machines, the 61005299 is undoubtedly an investment worth considering.
Top Page Image Contents