Maytag BRAVOSTM manual Remove Shipping Base and Packing Ring, Connect Drain Hose

Remove Shipping Base and Packing Ring

1.Place cardboard supports from shipping carton on floor behind washer for support.

2.Secure the lid with tape.

3.Using 2 or more people, tip the washer onto its back and place on cardboard supports.

4.Remove foam shipping base.

5.Set washer upright.

6.Remove tape from lid. Open lid and remove foam packing ring from washer tub. Keep foam packing ring in case you need to move the washer in the future.

Connect Drain Hose

Proper connection of the drain hose protects your floors from damage due to water leakage. Read and follow these instructions.

The drain hose is connected to your washer and is stored inside the washer cabinet.

Remove drain hose from washer cabinet

Pull the corrugated drain hose out of the washer by first grabbing the pull tie. Continue to pull the hose until the end emerges. Do not force excess drain hose back into the rear of the washer.

8