Dryer Controls At A Glance
Step 1 Select Cycle
WRINKLE RELEASE will release wrinkles from items that are clean and dry but slight- ly wrinkled. This cycle is for clothes from a crowded closet or suitcase or from sitting in the dryer too long after the end of the cycle. It provides 10 minutes of heated tumbling and 5 minutes of
DAMP DRY is designed to “partially” dry items. It provides approximately 20 minutes of heated tumbling and 5 minutes of cool- down tumbling without heat. Press the START button to begin tumbling.
TIME DRY may be selected for any load if the IntelliDry sensor system is not desired. Set the control to the desired number of minutes and choose the appropriate drying temperature for the load. Then press the START button.
AIR FLUFF provides tumbling without heat for sensitive loads or items needing freshen- ing. Examples are: certain sweaters, shower curtains, camping gear, pillows, etc. Set the control to the desired number of minutes, up to 20 minutes, and press the START button.
IntelliDry REGULAR FABRICS automati- cally senses the moisture in the load and shuts off when the selected dryness level is reached. This cycle is designed for loads such as towels, underwear,
IntelliDry PERM’T PRESS with Press Care automatically senses the moisture in the load and shuts off when the selected dryness level is reached. Permanent Press minimizes wrinkles of
7
