Water intake error, Door opening error | Maytag MAF9501 specification

Water intake error

If F4 is flashing in the display.

Fault with water supply. Check:

-that the tap on the water pipe is open.

-that the filter in the machine’s water intake is not blocked.

1. Shut off the water tap.

2. Unscrew the hose.

3. Clean the filter in the intake valve on the machine.

4. Screw the hose back on.

5. Turn on the tap.

6. Run the programme again to check if the fault is fixed.

7. If the fault remains, call the service divi- sion.

If F6 is flashing in the display, call the service division.

Image 17

Contents

Operating Instructions Washing Machine Contents Transport protection Before using your machine for the first timePacking material Washer door Safety instructions Keep an eye on children Child safetyAutomatic door opening Detergent compartment Parts of the washing machine Options buttons Front panel Advice and tips before washing Economy and efficiency Wool and silkArtificial fibres and synthetic fibres Sort your laundry Washing Select programme Programme chart Temperature Select options and settingsDelayed Start Spin speed/No spin 8Once the programme has finished 7Close the door and press the Start/Stop buttonTime remaining To add or remove washing after the programme starts Checking the filter and drainage pump Care and cleaningCleaning the outside of the machine Do as follows Rinse holes under the agitatorIf you have hard water Error messages TroubleshootingWasher door will not open Machine will not start Door opening error Water intake error Standard tests Technical dataTechnical information Transport protection Adjusting the feet InstallationPositioning the washing machine Connection to water supply Connection on delivery Electrical installationProgramme plate in multiple languages Before contacting the service division Service Search words Washing Quick guideLoad the laundry Detergent compartment