Maytag MAF9501 Rinse holes under the agitator, If you have hard water, Do as follows

Rinse holes under the agitator

If you think that objects such as nails, paper clips, needles or the like may have fallen into the wash drum, you should check un- der the agitator. Such objects can rust and cause spots on clothing. Nails and other sharp objects can cause holes in fabrics.

Do as follows:

1. Use a screwdriver or similar tool.

2. Insert the screwdriver into the central hole on the agitator and twist the screwdriv- er handle gently to the left.

3. With your other hand, grasp the agita- tor and pull it towards you as shown in the illustration.

4. Lift the agitator.

5. Remove any objects.

6. Place the agitator in the mounting hole with the F-mark towards you. Ensure that all the agitator fasteners are in their holes in the drum. Push it away from you until it catches.

If you have hard water

If you live in an area with hard water, the washer drum may develop a greyish-white coating. To get rid of this, empty a sachet of citric acid, approximately 20 grams, into the washer drum and run the White Cot- ton wash at 95° C.You can find citric acid among the spices, etc. at your local super- market.

1

2

15