CONTROLS AT A GLANCE CONT.
Step 3 Select Water
Temperature
Press the appropriate button to select the wash and rinse temperatures. Follow the garment care label for best results. Use the chart at the right as a guide.
REMEMBER: In wash water temperatures below 65° F, detergents do not dissolve well or clean well. Care labels define cold water as up to 85° F.
LOAD TYPE
HOT/COLD – White and heavily soiled, color-fast items
WARM/WARM – Delicate or colorfast items
WARM/COLD – Moderately soiled, colored items; most wrinkle free items
COLD/COLD – Brightly colored, lightly soiled items; washable woolens
Step 4 Select A
Customized Cycle
Press the appropriate button(s) to select one or more options.
USE
SUPER WASH – Can be used with any wash cycle to clean very heavily soiled items. Provides fast agitation and normal spin throughout all cycles.
EXTRA RINSE – Provides an additional rinse at the end of the cycle to more com- pletely remove laundry additives, suds, per- fume, etc.
AUTO TEMPERATURE CONTROL (select models) – assures a cold water wash of 75°F and warm water wash of 95°F. This option assures detergent will dissolve and provide optimum cleaning results.
CANCEL – Press this button to cancel and reset any of the options.
If Auto Temperature Control (select models) is selected with a warm/warm, warm/cold, or cold/cold water tempera- ture setting, the light will illuminate dur- ing the first fill.
PRESOAK
SOAK
ONLY
MAX EXTRACT
NORMAL SPIN
PRESOAK: Provides 12 minutes of agi- tation and soak before going into the wash cycle.
SOAK ONLY: Provides three minutes of agitation and then a soak, then three min- utes of agitation before an extended soak. Soak for 30 minutes or less.
MAX EXTRACT: Provides three extra minutes of spin to remove more moisture from loads, such as towels. Can only be used with the WHITES cycle.
NORMAL SPIN: Provides adequate water removal for most loads.
Step 5
START WASHER
•Add detergent and any additives
•Add load and close lid
•Pull the control dial out to start
3
