Using the Controls - Auto Dry Models
STEP 1
Select Temperature
In order to select the correct temperature, turn the Temperature control to one of four choices; Regular, Medium (select models), Delicate or Air Fluff.
DRYER TEMPS | LOAD TYPE |
|
|
Regular | Sturdy cottons or labels marked |
| Tumble Dry. |
|
|
Medium | For |
(select models) | synthetics, lightweight cottons |
| labeled Tumble Dry Medium. |
|
|
Delicate | For heat sensitive items labeled |
| Tumble Dry Low or Tumble Dry |
| Medium. |
|
|
Air Fluff | Items which need freshening. |
| Load tumbles with room |
| temperature air. Use the Time |
| Dry/Air Fluff cycle. |
|
|
STEP 2
Select Options
Extended Tumble (select models)
Extended Tumble is provided to minimize wrinkles in the Auto Dry Wrinkle Control cycle. This feature provides an extra 60 minutes of unheated tumble action at the end of the cycle. Clothes can be removed any time during this portion of the cycle.
The additional 60 minutes of unheated tumbling can be canceled by turning the switch to Off.
End of Cycle Signal
When the cycle is complete, a signal will sound. On select models, the End of Cycle Signal can be turned down or Off.
Remove load immediately to reduce wrinkling.
STEP 3
Select Cycle
To select a cycle, rotate the control dial to the desired setting. When using an Auto Dry cycle, the control dial should point between More Dry and Less Dry for most loads.
Loads of larger or bulkier size may require the More Dry setting to completely dry the load. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most cottons and linens. At the end of the cycle, the clothes are cooled for approximately 10 minutes to reduce wrinkling.
Auto Dry Wrinkle Control
The Auto Dry Wrinkle Control cycle is designed to dry
3