Using the Controls - Sensor Models
STEP 1
Select Temperature
In order to select the correct temperature, turn the Temperature control to one of four choices; Regular, Medium, Low or Air Fluff.
DRYER TEMPS | LOAD TYPE |
|
|
Regular | Sturdy cottons or labels marked |
| Tumble Dry. |
|
|
Medium | For |
| synthetics, lightweight cottons or |
| items labeled Tumble Dry Medium. |
|
|
Low | For heat sensitive items labeled |
| Tumble Dry Low or Tumble Dry |
| Medium. |
|
|
Air Fluff | Items which need freshening. |
| Load tumbles with room |
| temperature air. Use the Time |
| Dry/Air Fluff cycle. |
|
|
STEP 2
Select Options
Extended Tumble
Extended Tumble is provided to minimize wrinkles in the Sensor Wrinkle Control cycle. This feature provides an extra 60 minutes of unheated tumble action at the end of the cycle. Clothes can be removed any time during this portion of the cycle.
The additional 60 minutes of unheated tumbling can be canceled by turning the knob to Off or opening the door.
STEP 3
Select Cycle
To select a cycle, rotate the control dial to the desired setting. When using a Sensor Wrinkle Control cycle, the control dial should point between More Dry and Less Dry for most loads.
Loads of larger or bulkier size may require the More Dry setting to completely dry the load. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
Sensor Regular
The Sensor Regular cycle is designed to dry most cottons and linens. At the end of the cycle, the clothes are cooled to reduce wrinkling.
End of Cycle Chime
When the cycle is complete, a chime will sound. The End of Cycle Chime can be turned off by turning the selector knob to Off.
Remove load immediately to reduce wrinkling.
Sensor Wrinkle Control
The Sensor Wrinkle Control cycle is designed to dry
5
