Refresh (select models)
The Refresh cycle is designed to release wrinkles from items that are clean and dry but only slightly wrinkled, such as from a crowded closet or suitcase or from sitting in the dryer too long after the cycle has ended. Refresh can be used with any temperature selection.
Note: If the dryer detects moisture in the load when Refresh is selected, the dryer will automatically switch to the Wrinkle Control cycle which may extend the cycle time.
Regular
The Regular cycle is designed to dry loads such as towels and underwear.
Jeans (select models)
The Jeans cycle is designed to reduce wrinkling and tangling in loads of jeans.
Wrinkle Control
The Wrinkle Control cycle is designed to dry wrinkle- free cottons, synthetic fabrics, knits and permanent press fabrics automatically.
Select models will automatically advance into Wrinkle Prevent which provides an extra 30 minutes of unheated tumble action at the end of the cycle.
On dryer models with optional Wrinkle Prevent, the additional 95 minutes of unheated tumbling can be canceled by turning the switch to Off or by opening the door.
Cycles and options may vary by model.
Delicates
The Delicates cycle is designed to dry
Time Dry/Air Fluff
The Time Dry cycle can be used to regulate the drying time. Use with any temperature setting. For timed drying, turn the cycle selector dial to the number of minutes desired. An indicator light will illuminate by the setting.
Note: Using the Air Fluff temperature setting will require a longer drying time.
STEP 5
Start the Dryer
After setting the cycle and desired options, press the cycle selector dial to start the dryer. To pause the cycle, press cycle selector dial again or by opening the door. To restart the cycle, press cycle selector dial and cycle will resume from the point of interruption.
Power Off
Turn the cycle selector dial to Power Off to cancel the cycle and stop the dryer.
8
