Operating Tips

Clean the Lint Filter...

• after each load.

• to shorten drying time.

• to operate more energy efficiently.

NOTE: Do not operate the dryer without the lint filter in place.

Load the Dryer Properly...

• by placing only one wash load in the dryer at a time.

• avoid very small loads or mixing heavyweight and lightweight clothes.

• when only one or two articles need drying, add a few similar items to improve tumbling and drying efficiency.

Add A Fabric Softener Sheet...

(If So Desired)

after loading the dryer.

to control static cling.

before the load becomes warm. This helps prevent greasy–looking softener stains.

and remove any used softener sheets from the dryer to prevent greasy–looking softener stains.

Use A Drying Rack...

(Found in select models or purchased separately from your dealer using part # MAL1000AXX.)

• to dry items, such as sneakers, pillows, caps, stuffed toys, washable sweaters, etc. inside the dryer without tumbling. (Make sure nothing hangs over the edge of the rack.)

• with a Time Dry heat cycle or an Air Fluff cycle according to care label recommendations.

• by positioning the rack in the tumbler with the two extension wires towards you. The legs should rest firmly on the front and back of the drum.

4

Page 5
Image 5
Maytag MD9206 warranty Operating Tips, Clean the Lint Filter, Load the Dryer Properly, Add a Fabric Softener Sheet