Manuals / KitchenAid / Kitchen Appliance / Range

KitchenAid W10524723A warranty Range Care, CleanCycle

Models: W10524723A

1 48
Download 48 pages 62.3 Kb
Page 16
Image 16

RANGE CARE

CleanCycle

AquaLift™ Technology is an innovative cleaning solution that utilizes heat and water to release baked-on spills from the oven in less than 1 hour. This new cleaning technology is a low-heat, odor- free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean cycle. If your oven cavity is above 200°F (93°C), “OVEN COOLING” will appear in the display, and the Clean cycle will not be activated until the oven cavity cools down.

To Clean:

1.Remove all racks and accessories from the oven cavity and wipe excess soil. Use a plastic scraper to remove easily- removed soils.

2.Pour 1¾ cups (14 oz [414 mL]) of distilled or filtered water onto the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the water. Do not open the oven door during the Clean cycle. The water on the oven bottom is hot.

3.Press AQUALIFT SELF CLEAN and then START on the oven control panel.

4.Allow 40 minutes for cleaning and cool down. A beep will sound when the Clean cycle is complete.

5.Press OFF at the end of the cycle. OFF may be pressed at any time to stop the Clean cycle.

6.Remove the residual water and loosened soils with a sponge or cloth immediately after the Clean cycle is complete. Much of the initial 1¾ cups (14 oz [414 mL]) of water will remain in the oven after the cycle is completed. If additional soils remain, leave a small amount of water in the oven bottom to assist with the cleaning.

7.If any soils remain, remove them with a non-scratch scrubbing sponge or plastic scraper. Additional Clean cycles may be run to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals, including commercial oven cleaners or metal scouring pads, may cause permanent damage to the porcelain surface of the oven interior.

NOTES:

■The range should be level to ensure that the entire surface of the bottom of the oven cavity is covered by water at the beginning of the Clean cycle.

■For best results, use distilled or filtered water. Tap water may leave mineral deposits on the oven bottom.

■Before removing the residual water and loosened soils at the end of the Clean cycle, insert a cloth or paper towel between the lower edge of the oven door and the front frame to keep water from spilling onto the front of the range and the floor.

■Soil baked on through several cooking cycles will be more difficult to remove with the Clean cycle.

■Nonabrasive scrub sponges or eraser style cleaning pads (without cleaners) can be effective for cleaning the oven cavity walls, oven door and oven bottom for difficult soils. For best results, moisten the pads and sponges before use.

■Run an additional Clean cycle for stubborn soils.

■affresh® Kitchen and Appliance Cleaner and affresh® Cooktop Cleaner may be used to clean the oven bottom, walls and door when the oven has finished the cycle and returned to room temperature. If affresh® Cooktop Cleaner is used, it is recommended to wipe out the cavity with distilled water as well. Refer to the “Accessories” section for information on ordering.

■Additional AquaLift™ Technology Cleaning Kits may be obtained by ordering Part Number W10423113RP. See the “Accessories” section for more information.

■For assistance with AquaLift™ Technology, call

1-877-258-0808, or visit our website at http://whr.pl/aqualift.

16

Page 15 Page 17
Page 16
Image 16
KitchenAid W10524723A warranty Range Care, CleanCycle
Page 15 Page 17

W10524723A specifications

The KitchenAid W10524723A is a premium stand mixer attachment designed to enhance the culinary experience for home cooks and baking enthusiasts alike. This versatile attachment is primarily crafted for use with KitchenAid stand mixers, which are renowned for their durability, performance, and user-friendly designs. The W10524723A enhances the already impressive capabilities of these stand mixers, allowing users to explore new culinary possibilities.

One of the standout features of the W10524723A is its ability to transform the stand mixer into a powerful food processor. The attachment allows for quick and efficient slicing, shredding, and grating of various ingredients, from vegetables to cheese. This functionality not only saves time but also encourages creativity in the kitchen, as home cooks can experiment with diverse recipes.

The W10524723A is equipped with a range of stainless steel blades and discs designed for specific tasks. These include a thin slice, thick slice, and two shredding options (fine and coarse), providing users with the flexibility to achieve the desired texture and presentation in their dishes. The stainless steel construction ensures durability and longevity, making it a worthy investment for any kitchen.

In terms of ease of use, the W10524723A features an easy-to-assemble design, allowing users to quickly connect and detach the attachment from their stand mixer. This system ensures that transitioning between tasks is seamless, catering to the fast-paced environment often found in home kitchens.

The attachment also boasts a wide feed tube that accommodates larger ingredients, reducing the need for pre-cutting and thus streamlining the food prep process. Furthermore, the comprehensive user guide provides instructional tips and recipe ideas, helping users maximize the potential of their new attachment.

Safety and versatility are also key characteristics of the W10524723A. It is designed to be compatible with various KitchenAid stand mixer models, making it a versatile addition to any kitchen setup. Overall, the KitchenAid W10524723A is an innovative tool that significantly enhances food preparation capabilities, promoting efficiency and fostering creativity among home cooks. With its robust features and practical design, this attachment is sure to become a staple in the modern kitchen.